Linux Trap ID and SNMP Traps Reference Guide For use with SmartStart version 8.30

Page 10 of 53
User action: If the tape library door is open, close the tape library door.
Supporting SNMP trap data:
 sysName
 cpqHoTrapFlags
 cpqDaCntlrHwLocation
 cpqDaTapeLibraryCntlrIndex
 cpqDaTapeLibraryScsiBus
 cpqDaTapeLibraryScsiTarget
 cpqDaTapeLibraryScsiLun
 cpqDaTapeLibraryModel
 cpqDaTapeLibraryFWRev
 cpqDaTapeLibrarySerialNumber
 cpqDaTapeLibraryDoorStatus
Supporting SNMP trap description: Tape Library Door Status Change, slot number:
[cpqDaCntlrHwLocation], bus number [cpqDaTapeLibraryScsiBus], Target ID:
[cpqDaTapeLibraryScsiTarget], Lun Number: [cpqDaTapeLibraryScsiLun]. Status is now
[cpqDaTapeLibraryDoorStatus]".
3043 - cmaidad
Log message: “Tape Drive Status Change, slot number: [cpqDaCntlrSlot], bus number:
[cpqDaTapeDrvBusI ndex], drive ID: [cpqDaTapeDrvScsi IdI ndex]. Status is now [cpqDaTapeDrvStatus
string].”
SNMP trap: cpqDa6TapeDriveStatusChange - 3043 in CPQIDA.MIB
Symptom: Tape Drive Status Change. The agent has detected a change in the status of a tape drive. The
variable cpqDaTapeDrvStatus indicates the current tape status. The variable cpqDaTapeDrvScsiIdIndex
indicates the SCSI ID of the tape drive.
User action: If the tape is failed, check the tape and all SCSI connections.
Supporting SNMP trap data:
 sysName
 cpqHoTrapFlags
 cpqDaCntlrHwLocation
 cpqDaTapeDrvCntlrIndex
 cpqDaTapeDrvBusIndex
 cpqDaTapeDrvScsiIdIndex
 cpqDaTapeDrvLunIndex
 cpqDaTapeDrvName
 cpqDaTapeDrvFwRev
 cpqDaTapeDrvSerialNumber
 cpqDaTapeDrvStatus
Supporting SNMP trap description: “Status is now [cpqDaTapeDrvStatus] for a tape drive.”
3044 - cmaidad
Log message: “Tape Drive Cleaning Required, slot number: [cpqDaCntlrSlot], bus number:
[cpqDaTapeDrvBusIndex], drive ID: [cpqDaTapeDrvScsiIdIndex]”
SNMP trap: cpqDa6TapeDriveCleaningRequired - 3044 in CPQIDA.MIB
Symptom: Tape Drive Cleaning Required trap. The agent has detected a tape drive that needs to have a
cleaning tape inserted and run. This will cause the tape drive heads to be cleaned.
Supporting SNMP trap data:
 sysName
 cpqHoTrapFlags
 cpqDaCntlrHwLocation
 cpqDaTapeDrvCntlrIndex
 cpqDaTapeDrvBusIndex
 cpqDaTapeDrvScsiIdIndex