HP SVA V2.1 System Administration Guide

3. Delete a Display Surface
4. Change the arrangement of nodes in a Display Surface
5. Replace nodes in a Display Surface with different nodes
6. Completely redefine a Display Surface
7. Replace one display node with another in one or more Display Surfaces
8. Exit
Enter request:2
Please enter the display surface name to create.
Stereo_1
Is this display used for stereo graphics? y/[n]
y
The following types of stereo display are supported:
1) Active stereo using DDC glasses.
2) Active stereo using "blueline" glasses.
3) Active stereo using the graphics card's DIN connector.
4) Passive stereo using paired projectors.
Select the type of stereo display (1,2,3,4):
2
2.4.4.2 Change a Display Surface
The prompt sequence for the Display Surface Configuration Tool for Option 6 (Completely
redefine a Display Surface) first requests the name of the Display Surface that you want
to change. It then continues with the same prompt sequence described in Section 2.4.4.1.
2.4.5 More Information
SVA mostly provides a pass-through service to allow a user to trigger the NVIDIA card to work
with appropriate display hardware. You should consult the hardware manufacturer's
documentation to understand the properties of the display device. In addition, the user should
consult Appendix D of the NVIDIA User's Manual installed on every SVA cluster:
file:///opt/hp/graphics/nvidia/nvidia-docs/html/index.html
You can access this file url from any node in an SVA cluster.
50 Setting Up Display Devices