HP SVA V2.1 System Administration Guide

Table 1-6 Job Configuration File: Tag Definitions for the SVA_JOB Section
DefinitionTags within Section
SVA_JOB
Declares site default settings for all jobs.
The number of display nodes assigned to a job.
SVA_DISPLAY_COUNT
The number of render nodes assigned to a job.
SVA_RENDER_COUNT
1
The number of compute nodes assigned to a job.
SVA_COMPUTE_COUNT
1
The list of render hosts assigned to a job.
SVA_RENDER_HOSTS
The list of display hosts assigned to a job.
SVA_DISPLAY_HOSTS
The list of compute hosts assigned to a job.
SVA_COMPUTE_HOSTS
Turns the X cursor on or off on display nodes.
A value of 0 sets cursor to appear on nodes. A value of 1
sets the cursor not to appear on nodes.
SVA_UNCLUTTER
1
,
2
Sets the Display Surface used for the job. The default is
to use the first Display Surface, SVA_DS_1_1.
SVA_DISPLAY_SURFACE
1
1 This tag can also be defined in the User Configuration File.
2 This tag is also defined in the Site Configuration File.
Table 1-7 Section/Tag Definitions for the Job Settings Configuration File
DefinitionTags within SectionSection
The role assigned to this host for the
job.
SVA_ROLE
1
[host_name]
Defines roles and ranks for the list of
named hosts. Defines number and
orientation of tiles when more than
one tile is attached to a display node.
Number of display devices attached
to the display node. A value of 1
indicates one display device. A value
of 2 indicates two display devices.
SVA_NUM_TILES
1
Indicates that the tiles attached to a
single display node are arranged
horizontally (value equals
.horizontal), vertically (value
equals .vertical) or in an n x n
arrangement of four tiles only (value
equals .square). Set this value to
empty if there is only one tile for the
display node.
SVA_TILE_ORIENTATION
1
A unique number within the role of
the host as it applies to the job. The
numbers are generated starting from
1 when resources are allocated to the
job.
SVA_RANK
1 Also defined in the Site Configuration File.
1.2 Changing Data Files
The owner of the data, site manager, and user can add their own sections, tags and values to a
data file to suit their own system environments. However, there are restrictions on changes to
the Site Configuration File as described in the following section.
1.2 Changing Data Files 23