HP SVA V2.1 System Administration Guide

Table 1-2 Site Configuration File: Section/Tag Definitions (continued)
DefinitionTag within SectionSection
Indicates whether the cluster has a KVM. A
value of 0 indicates there is no KVM. A value
of 1 indicates there is a KVM.
The default value is 0.
A list of node names that can act as display
nodes.
SVA_DISPLAY_HOSTS[SVA_ROLES]
Lists of the render and
display nodes.
A list of node names that can act as compute
nodes.
SVA_COMPUTE_HOSTS
A list of node names that have one graphics
card.
SVA_ONE_GPU_HOSTS
A list of node names that have two graphics
card.
SVA_TWO_GPU_HOSTS
A list of node names that have zero graphics
card.
SVA_NO_GPU_HOSTS
A list of node names that can act as render
nodes.
SVA_RENDER_HOSTS
Table 1-3 Site Configuration File: Section/Tag Definitions (cont.)
DefinitionTags within INSTANCEINSTANCE
The name of the host where the master
component of the application runs.
SVA_EXECUTION_HOST
1
[surface_name]
Declares each Display Surface by
name with all of its display and
render hosts.
A list of all the hosts with display
devices in the Display Surface.
SVA_DISPLAY_HOSTS
The position of this display device as
it relates to other display devices in a
Display Surface.
host_name.COORDINATE
Indicates that the tiles attached to a
single display node are arranged
horizontally (value equals
.horizontal), vertically (value
equals .vertical) or in an n x n
arrangement of four tiles only (value
equals .square). Set this value to an
empty string if there is only one tile for
the display node.
SVA_TILE_ORIENTATION
1
Display nodes only.
The number of display devices
attached to the display node. A value
of 1 indicates one display device. A
value of 2 indicates two display
devices.
SVA_NUM_TILES
1
Display nodes only.
1
Also defined in the User Configuration File under SVA_JOB.
20 Managing Configuration Data Files