HP SVA V2.1 System Administration Guide

surface_name
The generated name of the Display Surface.
Names are generated as SVA_DS_1_1_d_n, where d is the number of display
devices in the surface and n is the sequence number of surfaces within a
number of devices.
Valid characters must be lower and uppercase letters a-z, digits, and
underscores. Name must begin with a letter.
1.1.4.2 Site Configuration Section and Tag Entries
The following tables define the main sections and their associated tags in the Site Configuration
File.
Table 1-1 Site Configuration File: Tag Definitions for the SVA_JOB Section
DefinitionTag within Section
SVA_JOB
Declare site default settings for all jobs. All the tags in SVA_JOB can be superseded by values in the User Configuration
File.
Indicates whether or not HP Remote Graphics Software
is used by default for all jobs.
SVA_USE_REMOTE3D
Indicates whether or not DMX is used by default for all
jobs.
SVA_USE_DMX
The name of the SLURM partition from which to request
resources. Refer to the HP XC documentation for more
information on SLURM.
SVA_PARTITION
Provides a means to supply options to X Servers. This
value is set by running the svaconfigure utility, or by
a root user with an svaputdata call.
For example, SVA_X_OPTIONS="-ac".
SVA_X_OPTIONS
The number of render nodes to request for a job.
This value is set in the Job Settings File by the call to
svaselect in the launch script. This value can exist in
the User Configuration File to set the default for jobs.
The initial site configuration sets the default value to all
of the render nodes in the cluster.
SVA_RENDER_COUNT
Sets the Display Surface to use for the job. The default is
to use the first Display Surface, SVA_DS_1_1.
SVA_DISPLAY_SURFACE
Turns the X cursor on or off on the display nodes. A value
of 0 sets the cursor to appear on nodes. A value of 1 sets
cursor to not appear on nodes.
SVA_UNCLUTTER
18 Managing Configuration Data Files