HP Scalable Visualization Array Version 1.1 System Administration Guide

Table 1-2 Site Configuration File: Section/Tag Definitions
DefinitionTag within SectionSection
The name of the cluster. This can be set by
the site administrator using the
svaconfigure utility. It defaults to the
external node name of the head node.
Identifies cluster-specific user configuration
files when using svagetdata calls.
SVA_CLUSTER_NAME[SVA_CLUSTER]
Defines default site settings for the session.
This section appears in the Site
Configuration File only.
Indicates that the tiles attached to a single
display node are arranged horizontally
(value equals .horizontal), vertically
(value equals .vertical) or in an n x n
arrangement of four tiles only (value equals
.square). Set this value to an empty string
if there is only one tile for the display node.
SVA_TILE_ORIENTATION
1
Display nodes only.
The number of display devices attached to
the display node. A value of 1 indicates one
display device. A value of 2 indicates two
display devices.
SVA_NUM_TILES
1
Display nodes only.
Indicates whether the cluster has a KVM. A
value of 0 indicates there is no KVM. A
value of 1 indicates there is a KVM.
The default value is 0.
SVA_KVM
A list of node names that can act as display
nodes.
SVA_DISPLAY_HOSTS[SVA_ROLES]
Lists of the render and display nodes.
A list of node names that can act as compute
nodes.
SVA_COMPUTE_HOSTS
A list of node names that can act as render
nodes.
SVA_RENDER_HOSTS
Table 1-3 Site Configuration File: Section/Tag Definitions (cont.)
DefinitionTags within INSTANCEINSTANCE
The name of the host where the master
component of the application runs.
SVA_EXECUTION_HOST
1
[surface_name]
Declares each Display Surface by name
with all of its display and render hosts.
A list of all the hosts with display devices in
the Display Surface.
SVA_DISPLAY_HOSTS
The position of this display device as it
relates to other display devices in a Display
Surface.
host_name.COORDINATE
Indicates that the tiles attached to a single
display node are arranged horizontally
(value equals .horizontal), vertically
(value equals .vertical) or in an n x n
arrangement of four tiles only (value equals
.square). Set this value to an empty string
if there is only one tile for the display node.
SVA_TILE_ORIENTATION
1
Display nodes only.
The number of display devices attached to
the display node. A value of 1 indicates one
display device. A value of 2 indicates two
display devices.
SVA_NUM_TILES
1
Display nodes only.
1 Also defined in the User Configuration File under SVA_JOB.
Configuration Data Files 17