HP Scalable Visualization Array Version 1.1 System Administration Guide

Table 1-1 Site Configuration File: Tag Definitions for the SVA_JOB Section
DefinitionTag within Section
SVA_JOB
Declare site default settings for all jobs. All the tags in SVA_JOB can be superseded by values in the User Configuration File.
Indicates whether or not HP Remote Graphics Software is used by
default for all jobs.
SVA_USE_REMOTE3D
Indicates whether or not DMX is used by default for all jobs.SVA_USE_DMX
The name of the SLURM partition from which to request resources.
Refer to the HP XC documentation for more information on SLURM.
SVA_PARTITION
Defines the geometry of the Display Surface tile. Typically this
defaults to the natural size for the X display. However, the value
specified in the User Configuration File takes precedence over the
default.
This value is passed to the X Server when it starts for a job.
SVA_TILE_GEOMETRY
Provides a means to supply options to X Servers. This value is set
by running the svaconfigure utility, or by a root user with an
svaputdata call.
For example, SVA_X_OPTIONS="-ac".
SVA_X_OPTIONS
The number of render nodes to request for a job.
This value is set in the Job Settings File by the call to svaselect
in the launch script. This value can exist in the User Configuration
File to set the default for jobs.
The initial site configuration sets the default value to all of the
render nodes in the cluster.
SVA_RENDER_COUNT
Sets the Display Surface to use for the job. The default is to use
the first Display Surface, SVA_DS_1_1.
SVA_DISPLAY_SURFACE
Turns the X cursor on or off on the display nodes. A value of 0
sets the cursor to appear on nodes. A value of 1 sets cursor to not
appear on nodes.
SVA_UNCLUTTER
16 SVA System Administration Tasks