HP SureStore E Tape Library Model 6/140 User's Guide

Getting Started
Installing the Library (for Authorized Service Personnel only)
Chapter 11-8
Setting Up the Library
1. Carefully move the library to the installation location (see “Choosing
a Location” on page 1-6).
2. Lower the library’s leveler feet using a 1/2-inch open-end wrench.
3. Secure the library to the floor (optional). Figure 1-2 illustrates the
library cabinet hole pattern for attaching floor mounting brackets.
The pattern is repeated on the front and rear of the cabinet base. All
holes are threaded 1/4 - 20.
Figure 1-2 Library Cabinet Hole Pattern