Cartridge Access Port Installation Instructions

62104 4
7. Fasten CAP to the tape library door hinges with four 1/4-20 x 1/2 long screws. Tighten
screws using T30 Torx driver.
8. Install CAP B EMI SHIELD using a T15 Torx driver and five No. 6-32 x 3/8-in. Torx Pan
Figure 2. CAP Installation
CAP Installation (a5601a_02)
6. 6-32 x 3/8-in. Pan Head Screw for CAP B Shield (5x)
7. CAP A EMI Shield
8. Top CAP Mounting Bracket
9. 1/4-20 x 1/2-in. Long Screw (4x)
10. CAP B EMI Shield
11. Bottom CAP Mounting Bracket
12. Locating Pin
13. 6-32 x 3/8-in. Pan Head Screw for CAP A Shield (5x)
14. Upper Door Locating Pin
15. Top CAP Mounting Bracket