HP Surestore Tape Library User's Guide

Chapter 1 Moving or Shipping the Library 55
Chapter 1
The tape automatically rewinds before it is unloaded. A status screen
displays the library’s progress as the tape is relocated.
d. From the Dr
ive and Tape Operations menu, select [Back] to return to
the Operations menu.
2. If shipping the library, remove tape cartridges from the magazines:
a. From the M
agazine Access menu, select one of the following options:
—Unloc
k Door
—Unloc
k All Doors
Use the [-] and
[+] keys to change the door selection.
b. Pull the unlocked drawer(s) out to access magazines and tapes. The
dr
awer may also be physically locked with a key. The key is typically
attached to the back of the power supply.
c. Remove the maga
zine by lifting it straight up with the handle.
d. To remove a tape, set the magazine on its back and grasp the top and
b
ottom corners of the tape. Pull the tape straight out of the magazine
and return the magazine to the library.
3. If shipping the library, lock the transport:
a. From the Adm
inistration menu, select the Run Test menu.
b. From Ru
n Test, use the [-] or [+] keys to select Lock Transport.
c. Select [O
K].
d. Select [Run]. The front panel display will indicate that the transport
has been locked.
Caution Do not power off the library until the interface is inactive.
Removing power from a SCSI or Fibre Channel peripheral when
the bus is active can result in data loss and/or indeterminate bus
states.
4. Power off the library. The power “standby” switch is recessed to avoid
accidental power cycles.