HP Surestore Tape Library User's Guide

22 Installing the 2/20, 4/40 & 6/60 Series Libraries into a Rack Chapter 1
3. Align the lower (black/silver) rail with the lower two clip nuts, and loosely
install a screw into each clip nut. (See Figure 6.)
a. Slide the rail so that it equals the rack depth, and loosely install the
sc
rews.
b. Tighten all screws to secure the rails.
c. Tighten the two pre-installed screws inside each mounting rail to
sec
ure the rail in position.
Figure 6 Up
per and Lower Rails
60
40
20