HP Surestore Tape Library User's Guide

Chapter 5 Removing and Replacing Cards 161

Chapter 5

Replacing a Card

1. Align the edges of the replacement card with the card slot.

2. Gently push on the lower third of the r

eplacement card, inserting it into the

library until the card is flush with the library. This will help ensure that the

backplane pins are optimally aligned.

3. Tighten the thumbscrews with a flat-blade screwdriver.

4. Reconnect external cables.

5. Power on the library.

6. Download new firmware (see Upgr

ading Firmware on page 176).

7. If installing Fibre Channel cards for the first time, configure the library

om the front panel. See Configuring the Library for Fibre Channel on

page 102.