HP SureStore Tape Autoloader Model 1/9 Upgrade and Parts Replacement Guide

Upgrading Firmware

Chapter 4 4-3

Upgrading Firmware

NOTE The firmware download may take several minutes to complete.

This section details the process for upgrading autoloader and drive

firmware. The processes for upgrading autoloader firmware may be

different from those used to upgrade drive firmware.

Firmware can be downloaded by:

• Using the remote management card (autoloader only)

• Using Library and Tape Tools (autoloader and drive)

• Using a CE diagnostic tool

• Using a firmware upgrade tape (drive only)

CheckingtheFirmwareRevision

Before downloading new firmware, check your current firmware

revisions and compare them to the latest available revisions at

www.hp.com/go/support, or contact your support provider.

NOTE If the autoloader is in a partial availability state (solid amber LED) due

to a firmware mismatch, download new firmware.

1. Be sure the autoloader is powered-on.

2. Use the following menu from the front panel:

Main Menu ->

Information ->

Firmware Revisions