HP SureStore Tape Autoloader Model 1/9 Upgrade and Parts Replacement Guide

Replacing Autoloader Parts
Removing and Installing Drive Modules
Chapter 33-6
InstallingaDriveModule
1. Hold the drive module with one hand on the drive module handle
while the other hand supports the drive (see Figure 3-3).
2. Install the drive moduleby inserting the rail at the top of the drive
module intothe slot at the top of the drivemodule opening.There will
be some resistance as the drive connector engages with the connector
on the autoloader.
Figure 3-3 Installing a Drive Module