HP SureStore E Tape Library Models 2/20, 4/40, and 6/60 - (English) User's Guide

Library Administration
Configuring the Library
Chapter 33-4
Factory default configuration settings are listed in Table 3-2.
Other
Configuration
Options
(see
page 3-26)
• Report Recovered (Soft) Errors: Reports
recovered errors over SCSI.
• Restore Factory Defaults: Restores the
default configuration settings (see Table
3-2).
• Prevent Media Access: Locks the library
doors and prevents front panel access.
On
N/A
Off
On or Off
N/A
On or Off
Table 3-1 Configuration Options
Menu Item Description Default Options
Table 3-2 Default Configuration Settings
Description Setting
Library controller SCSI ID (see page 3-19) 0
Drives 1-6 SCSI IDs (see page 3-19) 1-6
Clean count (see page 2-17) 0
Report recovered errors (see page 4-6) On
Cleaning cartridge location (see page 2-17) Unknown
Mailslot configuration (see page 3-6) 1
All online drive repair states (see page 4-54) Online pending
Prevent media access (see Table 3-1, “Other
Configuration Options”)
Off
Hard error, soft error, drive media, library event, and
recovery logs (see page 4-5)
Cleared
All move stored heights and offsets Returned to default positions