HP SureStore E Tape Library Models 2/20, 4/40, and 6/60 - (English) User's Guide

Library Administration
Configuring the Library
Chapter 3 3-3
Library Administration
Configuring the Library
You can change the following configuration options for the library:
Main Menu ->
Administration ->
Change Configuration
Table 3-1 Configuration Options
Menu Item Description Default Options
Password See “Enabling and Changing the Password”
on page 3-5.
Off On or Off
Network
Access
See “Using the Remote Management Card”
on page 3-9.
DHCP Off Assign an IP
address or
use DHCP
Mailslot
Configuration
See “Configuring the Mailslot” on page 3-6. One-slot None, one,
five, or ten
slots
Fibre Channel
or
SCSI IDs
See “Configuring the Library for Fibre
Channel” on page 3-15 or “Setting SCSI
IDs” on page 3-19.
N/A N/A
Save Element
Reserve After
a Power Cycle
Allows the host to continue reserving drive
or slots after a power cycle (a SCSI element
reservation). This is typically used to
ensure that only one host can access a slot
or drive. See “Configuration Information”
on page 3-26.
Off On or Off