60 - (English) User's Guide

Library Operations

Accessing Tapes in the Library

Chapter 22-14

Figure 2-8 Removing/Replacing a Magazine

3. Remove the magazine by lifting it straight up with the handle

(Figure 2-8).

4. To remove a tape, set the magazine on its back and grasp the top and

bottom corners of a tape. Pull the tape straight out of the magazine.

5. If desired, insert tapes into the magazine. Ensure that you use the

appropriate tape type for the magazine. Push the tape into the slot

until it “clicks” into place. (For more information, refer to Appendix

D.)

6. Reload the magazine into the door tray, and close the door. The library

will run an inventory check on the contents of that tape door.

NOTE If the library does not have all magazines, it will report a partial

availability message (see “Partial Availability State” on page 4-8).