HP SureStore E Tape Library Models 2/20, 4/40, and 6/60 - (English) User's Guide

Library Installation
Configuring the Host System
Chapter 1 1-49
Getting Started
e. To configure the Storage Node on the NetWorker server, verify the
ldev specifications:
io> Idev 30/34
LDEV: 30 DEVNAME: OUTDEV: 0 MODE:
ID: HPA4669A RSIZE: 128 DEVTYPE: MOSAR_AC
PATH: 10/4/4.0.0 MPETYPE: 24 MPESUBTYPE: 4
CLASS:
LDEV: 31 DEVNAME: OUTDEV: 0 MODE:
ID: DLT8000 RSIZE: 128 DEVTYPE: TAPE
PATH: 10/4/4.1.0 MPETYPE: 24 MPESUBTYPE: 8
CLASS: TAPE
...
LDEV: 34 DEVNAME: OUTDEV: 0 MODE:
ID: DLT8000 RSIZE: 128 DEVTYPE: TAPE
PATH: 10/4/4.4.0 MPETYPE: 24 MPESUBTYPE: 8
CLASS: TAPE
7. Save the configuration changes as follows:
a. Hold the configuration changes:
io> hold
b. Exit the io section:
io> exit
c. If you have followed the local convention for backing up the
configuration file, keep the changes:
sysgen> keep
keeping to group CONFIG.SYS
Purge old configuration (yes/no)?y
CAUTION Check with the system administrator to ensure you can keep the changes
to the configuration file.
d. Exit sysgen and reboot according to local convention:
sysgen> exit