60 - (English) User's Guide

Library Installation

Connecting and Powering on the Library

Chapter 11-28

NOTE The AC power cord is the library’s main AC disconnect device and must

be easily accessible at all times.

7. Connect a power cord to each power supply module on all levels.

8. Power on the library by pressing the recessed power (standby) switch,

located on the front of the library in the bottom right corner.

After the power-up test is complete (after several minutes), you will

see the Home Screen on the library's front panel. The Home Screen

displays the status of the drives and library. See “Front Panel Status

Information (Home Screen)” on page 2-7.

9. Power on other peripherals, and then the host.