60 - (English) User's Guide

Library Installation

Installing the Library into a Rack

Chapter 11-14

Figure 1-5 Clip Nuts (60-Slot Library)

2. Align the upper (black) rail with the top two clip nuts and loosely

install a screw into each clip nut. Slide the rail out so that it equals

the rack depth, and attach to the back clip nuts. To allow for enough

clearance, do not tighten these screws until you have installed the

library.

NOTE Ensure that you are using the appropriate holes in the upper rail to allow

enough clearance, illustrated in Figure 1-6. The clearance between the top

and bottom rails should be: 20-slot library = 21.6 cm (8.5 in); 40-slot

library = 43.2 cm (17 in); 60-slot library = 64.8 cm (25.5 in).

Front Back