60 - (English) User's Guide

Library Installation

Choosing a Location

Chapter 1 1-5

Getting Started

Choosing a Location

Choose a location that meets the criteria listed in Table 1-2. For

additional specifications, refer to Appendix A or the product information

labels located on the back of the library.

Table 1-2 Location Criteria

Room temperature 10-35º C (50-95º F)

Power source • AC power voltage: 100-127 V or 200-240 V

Autoselecting

• Line frequency: 50-60 Hz

• A dedicated circuit is required.

LAN connection Locate the library near a LAN connection for

connecting the remote management card.

Air quality Minimal sources of particulate contamination.

Avoid areas near frequently used doors and

walkways, stacks of supplies that collect dust,

and smoke-filled rooms.

CAUTION: Excessive dust and debris can

damage tapes and tape drives.

Humidity 20-80% RH