60 - (English) User's Guide

Troubleshooting, Removal, and Replacement

Removing and Replacing Drive Modules (for HP Authorized Personnel)

Chapter 44-58

Installing a Drive Module

WARNING It is not necessary to power off the library when inserting a

replacement drive module. However, to avoid injury, do not

insert your hand or foreign objects through the empty drive bay

and into the vertical lift assembly area.

1. Hold the drive module with one hand on the drive module handle

while the other hand supports the bottom (Figure 4-7).

2. Install the drive by inserting the rail at the top of the drive module

into the slot at the top of the drive module opening.

NOTE Higher force will be required in the last half-inch of insertion to engage

the electrical connection.

Figure 4-7 Installing a Drive Module