60 - (English) User's Guide

Troubleshooting, Removal, and Replacement

Removing and Replacing Drive Modules (for HP Authorized Personnel)

Chapter 4 4-57

Troubleshooting

5. Lay the connector assembly to the side, allowing the external cables

to hang from the connection(s). Do not disconnect external cables

from the connector plate.

6. Loosen the top and bottom thumbscrews on the drive module

(Figure 4-6).

7. Using the handle that is mounted on the back of the drive module,

pull the drive module straight out with one hand while supporting

the bottom of the drive module with the other hand.

CAUTION As the drive module is pulled out, support the bottom of the drive module

to avoid dropping or damaging it.

WARNING To avoid injury, do not insert your hand or foreign objects

through the empty drive bay and into the vertical lift assembly

area.

Figure 4-6 Removing a Drive