60 - (English) User's Guide

Troubleshooting, Removal, and Replacement

Removing and Replacing Cards (for HP Authorized Personnel)

Chapter 44-52

Replacing a Card

1. Align the edges of the replacement card with the card slot.

2. Gently push the replacement card into the library until the card is

flush with the library.

3. Tighten the thumbscrews (finger tight).

4. Reconnect external cables.

5. Power on the library.

6. Download new firmware (see “Upgrading Firmware” on page 4-60).

7. If installing Fibre Channel or remote management cards for the first

time, configure the library from the front panel. See “Configuring the

Library for Fibre Channel” on page 3-15 or “Using the Remote

Management Card” on page 3-9.