60 - (English) User's Guide

Troubleshooting, Removal, and Replacement

Diagnostic Support Tools

Chapter 44-46

Utility Rezero Performs “rezero” command on robotics.

Position to

Element

Performs “position to element” command on robotics.

Move Medium Moves 1 tape cartridge in library.

Exchange Medium Moves 2 tape cartridges in library.

Init Element

Status

Performs “initialize element status” command on

robotics.

Set Drive

Status

Changes on-line drive repair status of tape drives in

library.

Recalibrate (May not be supported, depending on library model.)

Performs a “recalibrate” diagnostic test and reports

results.

Data Capture Runs the “tape_capture -D -m” command and

displays the results.

Set Serial

Number

Changes the electronic serial number of robotics.

Options Display Format Displays data as either raw hex, decoded format text,

or both.

Table 4-13 Robotic Controller Expert Tool Command

Category Command Effect