60 - (English) User's Guide

Library Administration

Running Library Diagnostic Tests

Chapter 33-30

Unlock Transport Unlocks the transport assembly without power

cycling the library. The transport must have

already been locked to use this test.

NOTE: The transport assembly automatically

unlocks when library is powered on.

Test Transport

Comm

Exercises the infrared communications path

between the library controller and the transport

controller. Reports the health of this link. If the

test passes, the infrared communication link is

good.

Show All Sensors Dynamically displays the state of sensors. To

toggle door sensors, open and close the doors. To

toggle the mailslot sensor, open the mailslot to

access the first two tapes.

Demonstration CAUTION: Run an inventory check from the

host backup application after performing this

test to ensure that tapes are returned to their

original locations

Selects a random full storage slot, moves the

tape to the drive, and repeats the process until

all drives are full. The test locates a full slot, a

full drive, an empty slot, and then performs an

exchange.

Table 3-8 Front Panel Diagnostic Tests

Test Description