SAN Manager LM for HP-UX Release Notes

Adding HP-UX Hosts to the SAN Database 21
Installation
Adding HP-UX Hosts to the SAN Database
After SAN Manager LM is installed on an HP-UX host, the host must be added to the SAN
Manager LM database. This is done through the SAN Manager LM administration
application, which must be run on a Windows NT host, preferably one that is configured as
a primary domain controller.
Adding a Host to the Database
1. On the HP-UX host that you want to add to the database, obtain the host name or IP
address.
– To get the host name of an HP-UX host, use the command: hostname
– To get the IP address of an HP-UX host, use the command: ifconfig network
adapter name (for example, ifconfig lan0).
2. On a SAN Manager LM Windows NT host, run the SAN Manager LM administration
application (trsmadmin.exe).
3. Choose Database  Add Host.
The Add Host dialog box appears.
4. Select Host Name or IP Address.
5. Enter the host name or IP Address and click the Add Host button.