HP SureStore E SAN Manager LUN Management Administrator's Guide

88 Shortcut Menus
Note SAN Manager LM’s default naming convention is as follows: Vendor, World
Wide Name, LUN. For example, the disk SEAGATE 2000002037001177 00000 is
manufactured by Seagate; its World Wide Name is 2000002037001177; and the
device is logical unit number 0.
Remove Device
Removes the selected device(s) from the SAN database. This option is enabled only when
you right-click a missing device.
Host Shortcut Menu
Right-clicking a host in the Hosts pane displays the following options:
Ping Host
If a host’s status is unclear, choose this command to check the status. If the status is
different from the status displayed in the main window, SAN Manager LM will refresh and
display the correct status.
If you press Shift and choose the Ping Host menu item, the target host will scan the SAN
storage for a SAN Manager LM database. If the host finds a database with a different ID
than its previously known database, it will update and use the new database. Use this
operation if a new database was created while hosts were online. This operation will cause
a host that did not find a database at boot time to discover and use a new database.