HP SureStore E SAN Manager LUN Management Administrator's Guide

202 SAN Manager LM Detects Multiple Databases
Symptom Cause/Solution
SAN Manager LM has
detected multiple
databases.
SAN Manager LM is running on a host that has access to multiple
SAN Manager LM databases.
Note This situation can occur when UPM-partitioned devices with
database mirror set partitions are added to a SAN that already
has a database, or when a host is connected to multiple SANs.
Try one of the following solutions:
– Using the information in the Multiple Database Mirrors dialog box,
determine which database mirror set contains the current database.
Select all other database mirror sets and click the Remove Database
Mirror Set button. When prompted to confirm the deletion, click Yes.
When you remove a database mirror set, its database partitions are
automatically changed to SAN Manager LM’s free space partition type.
– Click Quit and resolve the problem by removing excess database
storage from the SAN.
– Quit the application and resolve the problem by reconfiguring the SAN
topology.
If SAN Manager LM’s drivers detect multiple databases when a host
is started, SAN Manager LM will not enable any devices for use on
the host. Correct the multiple-databases situation and reboot the
host.