HP SureStore E SAN Manager LUN Management Administrator's Guide

200 The SAN Manager LM Application Will Not Start
The SAN Manager LM Application Will Not Start
When starting SAN Manager LM, the following message appears:
Symptom Cause/Solution
When you start SAN
Manager LM, the
application notifies
you that you are not a
SAN Manager LM
administrator and
exits the application.
You are not a member of a designated SAN Manager LM
administration group. Log on to the machine as a SAN Manager
LM Administrator, or ask an Administrator to make any required
changes.
The Domain/Workgroup settings in the Network Neighborhood
properties dialog box are incorrect. Check the
Domain/Workgroup settings in the Identification tab of the Network
Neighborhood properties dialog box. If you logged on to the host as
a member of a local group that has SAN Manager LM administration
privileges, make sure the Domain/Workgroup field is pointing to the
workgroup. If you are using a domain account, verify that the
Domain/Workgroup field of the Network Neighborhood Identification
tab lists the correct domain.
The administration host failed to communicate with the domain
controller. To validate your login, check the network settings.