HP SureStore E SAN Manager LUN Management Administrator's Guide

Registry Values for Customizing SAN Manager LM 183
Advanced SAN
Administration
The values in the Host Settings dialog box change depending upon the platform of the
selected host. The previous illustration shows the Host Settings dialog box for a
Windows NT host with the HP SAN Manager LM QLogic HBA driver installed.
Note For details about each value in the Host Settings dialog box, see Table 6.
The last six values in the Host Settings dialog box only apply to users of the HP
SAN Manager LM QLogic HBA driver.
– For values that have check boxes, use the check boxes to toggle the settings
between 0 (disabled) and 1 (enabled).
– For values that have text fields, enter the desired value.
2. When you are finished changing a host’s settings, click OK to apply the settings and
close the dialog box.
Using a Registry Editor
Table 6 Registry Values for Customizing SAN Manager LM
Path:
Value Name:
Value Type:
Implicit Default:
Purpose:
HKEY_LOCAL_MACHINE\SOFTWARE\Hewlett-Packard\SAN Manager LM
PortRangeBase
REG_DWORD
6120 (decimal)
Tells the application and service which IP ports to use for their communications. The
application and service use the specified port plus the next two sequential ports.
Note The key path HKLM\SOFTWARE\Hewlett-Packard\SAN Manager LM is
not normally created by the installer. To add the PortRangeBase key to the
registry, you may have to create the key path first. This can be done by
using a registry editor. The installer will create the path if the
PortRangeBase key has been modified in the ModifiedInstall.txt file.