HP SureStore E SAN Manager LUN Management Administrator's Guide

108 Adding and Removing SAN Hosts
Adding Hosts Manually
1. Choose Database  Add Host.
The Add Host dialog box appears:
2. Select either Host Name or IP Address.
3. Enter the host name or IP Address and click the Add Host button.
4. Repeat steps 2 and 3 for additional hosts.
5. Click the Close button.
Removing a Host from the SAN Database
1. Unassign all storage from the host.
2. If the host is assigned to one or more share groups, remove it by right-clicking the host
icon in the Share Groups pane and choosing Remove Host from Share Group.
3. Physically detach the host from the SAN.
4. Uninstall SAN Manager LM from the host that you detached in step 3 and reboot the
host.
Caution Do not uninstall SAN Manager LM from a host that will remain attached to
the SAN. If SAN Manager LM and its drivers are not installed on all
SAN-attached hosts, SAN Manager LM’s exclusive storage assignments
could be compromised.