DLT VS80 Tape Drive Reference Guide

External Tape Drive Installation
18 DLT VS80 Tape Drive Reference Guide
Unpacking the Tape Drive
Caution: If the room where you are unpacking the drive differs from the
temperature at which the tape drive was shipped or stored by 30º F (15º C) or
more, let the drive acclimate to the surrounding environment for at least 12
hours before opening the shipping carton.
Unpack and inspect the tape drive for shipping damage:
1. Inspect the shipping box for damage. If you notice any damage, report it to the
shipping company immediately.
2. Open the shipping box and remove the accessories package. Open the
accessories package; you will need these items during installation.
3. With the drive still in the shipping box, reach under and around the drive.
Carefully lift it out of the shipping box and place it on the work surface, top
facing up. Do not stand the drive on either end.
4. Carefully remove the drive from the protective bag.
Note: Save the packing materials in case you need to move or ship the drive in the
future. You must ship the DLT VS80 tape drive in the original or equivalent packing
materials to preserve your warranty.