Hewlett-Packard HP SureStore E Disk System FC10 User and Service Guide

ManualsBrandsHP ManualsStorageHP Surestore Disk System fc10

100

100 ,VRO DWLQJ&DXVHV

Disk fault

LED is on

Critical Fault

LED on

Critical (See STM

Disk Tool)

Disk hardware is faulty. Replace the

disk.

Power supply

LED is amber

Critical Amber Critical Critical – An incompatible or defective

component caused a temporary

fault.

– Power supply hardware is faulty.

Unplug the power cord and wait for the

LED to turn off. Reinsert the power

cord. If fault persists, replace the power

supply.

Fan LED is

amber

Critical Amber Critical Critical Fan has slowed or stopped. Replace

the fan.

LCC fault

LED is on

Critical LCC

Fault

LED on

Critical Critical LCC hardware is faulty. Replace the

LCC.

LCC fault

LED is on

and the disk

system beeps

none LCC

Fault on

none none The Enclosure ID on the installed LCC

does not match the Enclosure ID on the

peer LCC. Reset the Enclosure ID and

reinsert the LCC.

GBIC fault

LED is on

Critical Tx Fail

LED on

none none – GBIC transmission circuit has failed.

– GBIC is not receiving power.

Reseat the GBIC. If problem persists,

replace GBIC. If the replacement GBIC

fails, contact HP technical support.

7DEOH 7URXEOHVKRRWLQJ7DEOHFRQWªG

Problem

Description

HWEvent