HP SureStore E Disk Array FC60 Service Manual (A5635A)

316 Internal Disk Enclosure Assemblies
5. To replace the backplane:
a. Stand the new backplane inside the chassis and push it over the alignment pins (B in
Figure 103). Connectors automatically align with floating fan connectors inside the
chassis.
b. Insert and tighten ten screws into the backplane and chassis.
6. To replace the mezzanine:
a. Attach the new mezzanine to the backplane connector (C in Figure 102).
b. Insert and tighten five Torx T-10 screws through the mezzanine and into the
backplane.
7. Replace the top cover. See "Top Cover Removal/Replacement" on page 310.
8. Reseat and secure the power supplies.
9. Reseat and secure the BCCs. See "BCC Module Removal/Replacement" on page 300.
10. Re-install the disk enclosure. See "Installing the Disk Enclosure SC10" on page 307.