HP SureStore E Disk Array FC60 Service Manual (A5635A)

202 Adding Capacity to the Disk Array
To increase capacity by replacing disk modules:
1. Identify the volume group impacted by the replacement of the disk modules. Make sure
you replace all the disks in the volume group with the higher-capacity disks.
2. Backup all data on the volume group.
3. From the host, stop all I/O activity to the volume group and unmount the file system.
4. Delete the volume group.
5. Replace the disk modules. See "Disk Enclosure Modules" on page 291 for instructions
on replacing disk modules.
6. Create a new volume group using the higher capacity disks.