HP SureStore E Disk Array 12H User's and Service Manual (C5445-90901, September 1999)

Operating the Control Panel
Using the Control Panel Buttons
73
Control Panel
3. Select Confirm.
4. Use the View Settings menu to check the rebuild progress.
Setting the Controller SCSI ID
1. Select the Cntrl Changes from the main menu.
2. Select SCSI ID.
3. Select a controller Cntrl X or Cntrl Y.
4. Select SCSI ID 0 to 15. (Offline takes disk array offline.)
5. Select Reset.
6. Select Confirm.
Changing Other Controller SCSI Settings
1. Select the Cntrl Changes from the main menu.
2. Select Unit Attn, Term Power, Parity, WDTR, SDTR, DRR, or VEB.
3. Select Enable or Disable.
4. Select Confirm.
Switching Controllers
1. Select the Cntrl Changes from the main menu.
2. Select Switch Cntrl.
3. Select Reset.
4. Select Confirm.
Testing a Controller
1. Select the Cntrl Changes from the main menu.
2. Select Reset Cntrl.
3. Select a controller Cntrl X or Cntrl Y.
4. Select Reset.
5. Select Confirm.