HP SureStore E Disk Array FC60 Service Manual (A5635A)

330 Controller Enclosure Modules
Power Supply Module Removal/Replacement
"
Hot Swappable Component!
A power supply should be replaced as quickly as possible to avoid the possibility of the
remaining supply failing and shutting down the disk array.
Removing the Power Supply Module
1. Turn off the power switch and unplug the power cord from the failed power supply
module. See Figure 110.
2. Lift up on the pull ring to release the latch. See Figure 111.
3. Slide the supply out of the enclosure.
Figure 110
Removing Power from the Controller Enclosure
A
Power Switch