HP SureStore E Disk Array FC60 Service Manual (A5635A)

Internal Disk Enclosure Assemblies 315
Removal and Replacement
Figure 102
Disk Enclosure Mezzanine Assembly Removal and Replacement
4. If you are removing the backplane:
a. Remove screw from the cam handle, open the handle, and pull power supplies free
of the backplane (see p. 298).
b. Loosen locking screws, open extractors, and pull BCCs free of the backplane. See
"BCC Module Removal/Replacement" on page 300.
Note
There is no need to loosen the fans.
c. Remove the ten T-15 screws along the top and bottom edges of the backplane. See
Figure 103.
d. Pull the backplane forward to clear alignment pins (B) and lift the backplane up and
out of the disk enclosure.
A - mezzanine board
B - backplane
C - pin connector