HP SureStore E Disk Array FC60 Service Manual (A5635A)

Internal Disk Enclosure Assemblies 305
Removal and Replacement
Removing the Disk Enclosure
To remove the disk enclosure, complete the following steps:
1. Stop all host I/Os to the array.
2. Power down the controller enclosure. Set both switches at the rear of the controller
enclosure to off.
3. Use a flat-blade screwdriver to unlock and open all disk enclosure doors (Figure 97).
Figure 97 Door Lock
4. Power off all disk enclosures by pressing the power button (out position) on each
enclosure.
5. Disconnect power and SCSI cables from the back of the disk enclosure being removed.
Disconnect any other cables that may interfere with the removal.
6. Remove the screws from the two rail clamps (D in Figure 98) at the rear of the disk
enclosure.
7. Remove the screws (A in Figure 98) from the mounting ears that secure the front of the
enclosure to the columns