HP SureStore E Disk Array FC60 Service Manual (A5635A)

Disk Enclosure Modules 297
Removal and Replacement
Figure 93
Disk Enclosure Fan Module Removal and Replacement
Installing the Fan Module
1. Slide the replacement fan module into the empty slot (C in Figure 93).
2. Tighten the locking screws (A).
3. Check the fan module LED for the following behavior:
– The Fan Fault LED should flash amber, and then turn green after a few seconds. If
the LED does not turn green, refer to "Troubleshooting" on page 207.
B
A - Locking screw
B - Pull tab