HP SureStore E Disk Array FC60 Service Manual (A5635A)

232 Controller Enclosure Troubleshooting
0x6C
0x01
Drive SCSI Channel 1
Turnaround diagnostics running
HW Diag. status
Controller module /
reseat or replace
0x6C
0x02
Drive SCSI Channel 2
Turnaround diagnostics running
0x6C
0x03
Drive SCSI Channel 3
Turnaround diagnostics running
0x6C
0x04
Drive SCSI Channel 4
Turnaround diagnostics running
0x6C
0x05
Drive SCSI Channel 5
Turnaround diagnostics running
0x6E
0xEE
Passive controller - Normal during Firmware download. The controller may be in this
state after power ON (in this case, use the AM60 software to set to “Active” state).
0x80 In-between programming steps
Firmware file is bad /
Download Firmware
with a good file.
0x80
0x00
Active controller - Normal State
0x81 Erasing boot flash segments
Firmware file is
downloading or
Firmware file is bad /
Download Firmware
with a good file.
0x82 Writing boot flash segments
0x83 Verifying erase of boot segments
0x84 Verifying write of boot segments
0x89 Erasing file flash segments
0x8A Writing file flash segments
0x8B Verifying erase of file flash
segments
0x8C Verifying write of file flash
segments
Table 30
Controller Status LEDs codes (cont’d)
Code Description Comments Cause / Solution