HP SureStore E Disk Array 12H User's and Service Manual (C5445-90901, September 1999)

Appendix C. Cabinet Configurations

Unpacking the Deskside Cabinet

224

Cabinets

Unpacking the Deskside Cabinet

To unpack the deskside cabinet, perform the following steps:

1. Cut the strapping bands, and slide the fully-packaged product off of the pallet as shown in Figure 38,

2. Remove the four plastic clips and lift the carton off of the cabinet. Also, remove the accessory tray and

then remove the top, front, and rear foam cushioning as shown in Figure 38, View 2.

3. Lift one edge of the cabinet, and then remove the bottom cushion from the opposite side. Repeat this

step for the other side of the cabinet. See Figure 38, View 3

4. Roll the cabinet off of the bottom tray as shown in Figure 38, View 4