Bridge FC4/2 Service and User Manual
788VLQJWKH)&6WDWXV0HQX
7DEOH )&6WDWXV0HQX'HVFULSWLRQV
Status Description
Laser type Must be short wave (SW).
SSB Source ID The identification of the SSB sending/transmitting data to the host. The ID
will be invalid if the topology is point-to-point or an unrecognized topology.
Speed The speed of the FC adapter
State LINK UP means the host and SSB connection is okay.
LINK DOWN means the host and SSB connection is inactive; there is no
communication between the SSB and host. It could also mean the SSB is in
transition; that is, the SSB is attempting to contact the host, but the host may
be down.
Topology The type of protocol being used
View loop address The address of the FC adapter in loop topology. Up to 126 devices,
addressed from 0 to 125, can be connected in a loop.
View node name The unique identifier, a 64-bit value the factory assigns to the SSB
View port name The FC port identifier, a 64-bit value that relates to the node name of the
SSB