32/64/76 Slot, 5.2 Gbyte Drive Optical Jukebox Upgrade and Conversion Instructions - C1160-90018

3-8
Converting 2.6 Gb Drive Jukeboxes to 5.2 Gb Drive Jukeboxes
Install a New Interposer PCA and Add the Configuration Module
• #4 - GPIO cable
• #5 - power input and fan sense cables
• #6 - vertical-path-clear emitter cable
IF INSTALLING A C5132J/K/L KIT OR C5133J/K/L KIT CONTINUE WITH
STEP 5 AND INSTALL A CONFIGURATION MODULE.
IF INSTALLING A C5131J/K/L KIT GO TO THE NEXT PROCEDURE.
5. Mount the configuration module as shown in Figure 3-5 (into socket shown by
#1 on Figure 3-4).
6. Route the SCSI cable, drive interface cable, and drive power cables up to the
interposer PCA.
Connect the drive power cable last, over the SCSI cable (see #3 on Figure 3-4).
CAUTION Make sure the cables are routed along the sides of the drive enclosures and do not
interfere with the flow from the drive cooling fans.
Figure 3-5 Mounting the Configuration Module