32/64/76 Slot, 5.2 Gbyte Drive Optical Jukebox Upgrade and Conversion Instructions - C1160-90018

3-11
Converting 2.6 Gb Drive Jukeboxes to 5.2 Gb Drive Jukeboxes
Replace 2.3 Gb Drives With 5.2 Gb Drives
Figure 3-8 Removing the Drive From the Drive Enclosure
6. Mount a new drive into the drive enclosure.
a. Place the new drive into the enclosure at the top position (see Figure 3-7).
Secure with two T-10 screws on each side.
b. Remove the adhesive backing on the plastic cable clamp and position the
clamp on the rear of the drive as shown in #1 on Figure 3-7.
c. As you connect the drive interface cable to its connector on the rear of the
drive, slide the cable into the cable clamp.
d. Replace the top and bottom cable access panels. Secure them with two T-10
screws apiece (see #1 and #2 on Figure 3-8).
e. Slide the enclosure into the chassis and secure the enclosure to the chassis
with one T-20 screw (see Figure 3-9).