HP StorageWorks Virtual Array Family Rack Installation Guide (This manual also covers the HP Surestore VA 7000 Family)

10
9
Re-install the bezel.
Re-install the disk modules.
From the rear of the enclosure, install the rear tie
down clamps and secure with two 10-32 screws.
Install the enclosure and secure with two T25 screws.
8
Install the bezel spacers.
7
WARNING!
Theemptyenclosuremayweighover60pounds
(27.2 kg). Two persons or a mechanical lift
should be used to move the enclosure,
or serious injury may result.
11