Optical Drive and Library SCSI-2 Command Reference

Autochanger Error Codes
Hardware Error Codes
Appendix BB-22
Table B-8 Hardware Error Codes (For the 40fx, 80ex, 125ex, and 220mx
models ONLY)
Error Code
(hex.)
Failure Description
JUKEBOX CONTROLLER PCA ERROR CODES
00 No error
01 ROM checksum error
03 RAM test error
04 Microprocessor test error
05
Controlled area of RAM checksum error
a
06 Illegal interrupt encountered by microprocessor
07 Illegal CPU exception encountered by microprocessor
09 Firmware error
SCSI INTERFACE-SPECIFIC ERROR CODES
0B SCSI controller register error
0C SCSI controller IC's RAM failed
0D SCSI controller message error
0E SCSI controller command error
0F SCSI controller kill error
10 SCSI controller FIFO error
11 SCSI controller target sequence error
12 SCSI controller command sequence error
13 SCSI controller status sequence error
LOOPBACK ERROR CODES
18 SCSI connector loopback error in DBO or I/O