Optical Drive and Library SCSI-2 Command Reference
Autochanger Error Codes
Hardware Error Codes
Appendix BB-20
11 Drive serial communications failure
1E Translate motor error
1F Vertical motor error
10 Drive configuration error
20 Plunge motor error
28 Mailslot sensor error
2B Top thumb sensor error
2C Bottom thumb sensor error
32 Invalid test number
33 Invalid configuration
34 Need to initialize element status
35 Exercise test failed
36 Elements reserved
38 Test can only be run from SCSI
39 Unable to run test
3C Move to
3D Flip
3E Translate
3F Put magazine in
40 Get magazine out
41 Test magazine
42 Put drive in
43 Get drive out
Table B-7 Hardware Error Codes (medium and large models only)
Error Code
(hex.)
Failure Description