Optical Drive and Library SCSI-2 Command Reference
Drive Error Codes
Internal Error Codes
Appendix A A-13
Drive Error Codes
0582XXXX ID Error reoccurs after retry even after changing ID Error
criteria
0583XXXX DMA Update failed after Automatic Reallocation
058AXXXX DMA Update Error condition
0601XXXX Received error code NN (see Table A-5 on page A-17) from ODC
chip
0664XXXX An ODC interrupt time out
0669XXXX A disk type cannot be distinguished (ID Status is CRC=NG)
066AXXXX A disk type cannot be distinguished (no ODC interrupt)
066DXXXX SFP sector cannot be read (ID Status is CRC=NG)
0670XXXX Cannot abort ODC command
0692XXXX Error Code NN received from the ODC chip
0702XXXX Received error code NN (see Table A-6 on page A-19) from the
DSP
075CXXXX Failed downloading DSP code
075EXXXX DSP request command communication error occurred
0760XXXX DSP command communication error occurred
0762XXXX Failed in the ECHO command of DSP
0767XXXX Target sector cannot be found (time out after SEEK complete)
0774XXXX Servo failure during write operation
0789XXXX LPC calibration failed
078BXXXX ID Offset Calibration failed
078CXXXX MO Offset Calibration failed
Table A-3 Internal Error Codes
Error
Code
(hex.)
Message